fbpx

Module Bluetooth HC-05 HC05

د.ت 32,000

د.ت 32,000

Add to cart
Buy Now
Avis (0)

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “Module Bluetooth HC-05 HC05”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

SKU: AN13 Category:

Product Description

Le HC 05 peut être utilisé en maître qu’en esclave contrairement au HC-06 qui peut uniquement être utilisé en esclave.  Alimenter en 5V avec des niveaux de signaux logiques 3.3V. Il semblerait que le module soit 5V tolérant. Cependant afin de garantir une longue durée de vie au module nous recommandons d’utiliser un pont diviseur de tension au niveau de la broche TX de votre arduino de sorte à envoyer un signal de 3.3V au RX de module Bluetooth.

  • HC-05 Pinouts are used for powering up the module and sending/receiving data via Serial Port.
  • So, let’s have a look at HC-05 Pinout, shown in below table:
HC-05 Pinout
Pin# Pin Name Working
Pin#1 Enable Pin  The purpose of this pinout is to set data value at a high and low level.
Pin#2 Vcc At this pinout, the input supply is provided to the module. Its operating voltage is plus five volts.
Pin#3 GND Ground (0V)
Pin#4 TX Serial Transmitting Pin.
Pin#5 RX Serial Receiving Pin
Pin#6 State This Pin is connected to an LED, shows the operating state of the HC-05 Bluetooth module.

 

HC-05, hc05, HC-05 Bluetooth Module, HC-05 Pinout, HC-05 datasheet, HC-05 Working, HC-05 Features, HC-05 applications