Module Bluetooth HC-05 HC05
ARDUINO
د.ت 32,000
Add to cart
Buy Now
Product Description
Le HC 05 peut être utilisé en maître qu’en esclave contrairement au HC-06 qui peut uniquement être utilisé en esclave. Alimenter en 5V avec des niveaux de signaux logiques 3.3V. Il semblerait que le module soit 5V tolérant. Cependant afin de garantir une longue durée de vie au module nous recommandons d’utiliser un pont diviseur de tension au niveau de la broche TX de votre arduino de sorte à envoyer un signal de 3.3V au RX de module Bluetooth.
- HC-05 Pinouts are used for powering up the module and sending/receiving data via Serial Port.
- So, let’s have a look at HC-05 Pinout, shown in below table:
HC-05 Pinout | ||||
---|---|---|---|---|
Pin# | Pin Name | Working | ||
Pin#1 | Enable Pin | The purpose of this pinout is to set data value at a high and low level. | ||
Pin#2 | Vcc | At this pinout, the input supply is provided to the module. Its operating voltage is plus five volts. | ||
Pin#3 | GND | Ground (0V) | ||
Pin#4 | TX | Serial Transmitting Pin. | ||
Pin#5 | RX | Serial Receiving Pin | ||
Pin#6 | State | This Pin is connected to an LED, shows the operating state of the HC-05 Bluetooth module. |
Avis
Il n’y a pas encore d’avis.